Latest Flowmeter Hire News & Announcements

La technologie NexSens se spécialise dans la conception des systèmes de mesure environnementaux en temps-réel. Les enregistrateurs des données NexSens, le logiciel et la technologie d’interface en ligne simplifient le processus du traitement et du partage des données à distance.

Vous pouvez voir la gamme de NexSens ici

RS Hydro has won the first phase of a project with major quarrying and construction products company Aggregate Industries that will see flow meters and telemetry systems installed at key operational sites across the UK.

The project will eventually capture flow, groundwater and water quality monitoring data from over 50 locations covering the company's main quarry, readymixed concrete, precast concrete and asphalt operations. Aggregate Industries will use this information to demonstrate its operational water consumption

RS Hydro provide you with the ultimate solution

RS Hydro members of staff are here to help you, we are dedicated to esuring that every client is well served. Our field engineers are highly skilled and have been recognised UK wide for their flexibility, willingness, innovation and

Need to measure open channel flow rates on a short term basis? RS Hydro have the perfect solution - the ISCO 2150 Area Velocity Flow Meter. Hiring this meter has never been simpler, RS Hydro offer a

First rate results from a first class meter

RS Hydro are renowned for being suppliers of first rate technology, the Thermo Scientific Orion Star A329 pH/ISE/Conductivity/RDO/Dissolved Oxygen Portable Meter is yet another meter distributed by RS Hydro which is the ultimate choice for taking advanced multiparameter

RS Hydro - provide the ultrasonic solution, the PT878 portable clamp on flow meter

With the largest rental fleet in the UK and huge sales under our belt it is safe to say RS Hydro are true experts in the Panametrics PT878 clamp-on flow meter . This non-invasive portable meter is

RS Hydro and the University of Birmingham (Water Sciences Group) are excited to announce that their Knowledge Transfer Partnership proposal has been successful and will be commencing soon.

RS Hydro now stock the Solinst PVDF Laser Marked Flat Tape to use in conjunction with the Solinst 103 Tag Line

Well it has been sometime in the waiting but the new Laser Flow Flowmeter has nearly arrived. So what is the fuss all about? The revolution really is in the technique, method and accuracy that the Laser flow incorporates.

Specialist engineers from RS Hydro are off to Bahrain to provide specialist training in clamp on gas flow measurement

RS Hydro are sending an engineer to the hotter climes of Bahrain next week to provide specialist training in clamp on gas flow measurement. RS Hydro are internationally recognised for its expertise in clamp on gas measurement having worked all

The GE Panametrics AT868 is now MCERTS certified. Our very own Rob Stevens collected the award on behalf of GE at the WWEM exhibition dinner. Click here to view the AT868 product page.

Today's process industry is a different world then it was 25, 10, or even 5 years ago. With continuing pressure to improve efficiencies and at the same time lower costs, plant managers are constantly forced to adapt at the speed

The ability to adapt to changes in it's function is often a key factor when choosing a flow metering system.

The ability to adapt to changes in function is often a key factor when selecting a flow metering system. So when a leading UK food manufacturer approached RS Hydro needing a system which combined good usability with extra functions for

Like most large organisations, one central boiler room is used to heat or cool multiple buildings. In this case student accommodation, lecture theatres, laboratories, sports halls and high-rise departmental buildings are being monitored.

Like most large organisations, one central boiler room is used to heat or cool multiple buildings. In this case student accommodation, lecture theatres, laboratories, sports halls and high-rise departmental buildings are being monitored. One of the main requirements

RS Hydro has invested €50,000 in the latest flow metering technology including the Panametrics PT878GC and the CTF Tag Flow Meters.

RS Hydro has invested £50,000 in the latest flow metering technology including the Panametrics PT878GC and the CTF Tag Flow Meters. The TransPort PT878GC is the latest portable gas clamp on flow meter from Panametrics, and is available to

RS Hydro were recently employed to test the efficiency of various hydro-electric turbines in the UK using a portable ultrasonic clamp on flow meter on pipes up to 2000mm in diameter - bigger than the average person!

Large pipes and flow meters have historically sent shivers down any project engineer's back, but thankfully those days are behind us. RS Hydro were recently employed to test the efficiency of various hydro-electric turbines in the UK using a portable

RS Hydro have recently won a contract to supply, install and commission 3 twin-channel GC868 flow meters to measure compressed air flow GC868 flow meters to be installed in Almeria, Spain.

RS Hydro have recently won a contract to supply, install and commission 3 twin-channel GC868 flow meters to measure compressed air flow GC868 flow meters to be installed in Almeria, Spain. Twin channel devices were specified to achieve higher measurement

Hot sticky boiler rooms are not the sort of places that most people want to spend much time in. However, for one lucky engineer, this was to be his place of work for several days.

Hot sticky boiler rooms are not the sort of places that most people want to spend much time in. However, for one lucky RS Hydro engineer, this was to be his place of work for several days. RS Hydro was

RS Hydro are now offering a selection of wastewater samplers for rental from the ISCO product range. We have added the GLS and 6712 sampler to our already extensive hire fleet.

RS Hydro are now offering a selection of wastewater samplers for rental from the ISCO product range. We have added the GLS and 6712 sampler to our already extensive hire fleet. These samplers are ideal for water quality and waste

RS Hydro are now able to offer flare gas measurement surveys. This is a particularly useful service for companies who need to comply with international regulations, are trying to identifying leaks, and flare burner control.

RS Hydro are now able to offer flare gas measurement surveys. This is a particularly useful service for companies who need to comply with international regulations, are trying identifying leaks, and flare burner control. The introduction of the Panametrics

RS Hydro recently used a portable non-invasive flow meter to measure landfill gas flows from different cells of a UK landfill site, providing an accurate assessment of methane production.

RS Hydro recently used a portable non-invasive flow meter to measure landfill gas flows from different cells of a UK landfill site, providing an accurate assessment of methane production. The demanding task of monitoring landfill gas flows is now much

RS Hydro were employed by an oil refinery to try and establish water usage across the site and find out where 100m3 was being lost.

RS Hydro were employed by an oil refinery to try and establish water usage across the site and find out where 100m3 was being lost. Water usage needed to be monitored for a three day period for 24 hours

RS Hydro has recently won a contract to supply the Panametrics CTF878 Correlation Tag flowmeter for clamp-on gas flow measurement in the Middle East used for a natural gas production facility

RS Hydro has recently won a contract to supply the Panametrics CTF878 Correlation Tag flowmeter for clamp-on gas flow measurement in the Middle East used for a natural gas production facility. The CTF is capable of mass flow measurement in

Long-term investment in plant and equipment at quarry sites is often not appropriate due to their limited life-spans. This often means installations are selected locally on their own merits with cost being a primary factor.

Long-term investment in plant and equipment at quarry sites is often not appropriate due to their limited life-spans. This often means installations are selected locally on their own merits with cost being a primary factor. However, many companies are now